Overhaul: Fork package
A suspension servicing will always be essential if you want to maintain your fork and shox for maximum life and racing performance. A well maintained and tuned suspension will performs at its best.
As the Authorized Distributor for Manitou Suspension, we offer a wide range of all types of after-sales services, repairs, and tuning options for the entire Manitou range. Besides that, we also provide suspension tuning and whole new servicing for Rock Shox, Marzocchi and Fox Racing Shox suspension range with Stendec products, tuning/service options to your personal specification.
- STENDEC CRYSTAL SUSPENSION OILS
Probably the most important element in your suspension is oil – what type you use, how often it is replaced and what volume is used. Stendec has developed its own range of both fork and rear shock oil which greatly enhances performance. Apart from performing the dampening operation Crystal oils protect and therefore prolong the life of any unit – a strong consideration when choosing what type of oil to use.
Stendec Crystal Fork oil is a formulated HSF fluid made from base oils and performance additives containing a radical new type of anti foaming agent. Crystal fluid is compatible with all seals and other fork components and actually increases seal life. Available in 2.5, 5, 7.5, 10, 15, 20 and 30 weight, all grades can be mixed if required to produce a mid weight blend. Apart from offering excellent temperature stability and dampening its particularly slippy consistency also reduces fork leg stiction.
More informations at Stendec-Works
Fork Overhaul services
- Disassembly and Assembly of entire Fork
- Inspection of Fork externals and internals
- Suspension Fluid change with Stendec oils
- Compression damper test
Fork Custom Tuning services
- High speed compression shim stack tuning
- Low speed compression shim stack tuning
- Speed needle tuning
- Suspension Fluid velocity weight mix tuning
Fork Travel change services
- Increment or reduction of travel of the Fork
Rear Shock Air Sleeve change services
- Disassembly and Assembly of Air Sleeve
- Inspection of Shox externals and internals
- Air Sleeve change
Tiong Hin Co Tyre - MTB Zone 
Paul said
Hi, how much will it cost to overhaul (Seal replacement, oil change etc) a 2013 Fox Talas 120/140mm fork??
melvin said
Hi, for the Talas system, price would be around $140 – $160 depending on the local Fox distributor charges for the entire system seal replacement and dust seal cap replacement as well.
Billy Seck said
Hi, does it mean you charge S140-160 as service charge and additional charge for entire seal and dust seal replacement? How long do you need to preform such service? Is it possible over two years as we are from overseas.
melvin said
Hi, depending on the local agent charges on the fork. Price range would be that range inclusive of seals usually.
Daven Chan said
do you guys service Fox float RP2 rear shock. if yes how much is cost n how long?
melvin said
Hi, so sorry but we don’t.
Aming Brunei said
Hi may I know how long will it takes to service and change the air sleeve and seal for my Fox 34 Float Evolution 26?
melvin said
Hi, it probably would take around 2 weeks.
GVMTB said
hi can you service my marz bomber 66 ata, if yes how much. thanks
melvin said
Hi, yes we do. Which year model is your 66?
Clark said
Hi, do you do oil change for Fox Float 32 FIT CTD? I suspect my fork dont have the correct oil (as I read sometimes they come out of the factory with little to no oil)? How much would that cost, how long does it take and do you do it in your Hougang store? Thanks!
melvin said
Hi, yes we do replace and service the necessary components of the entire fork. Duration usually 1/2 day for the fork, possible to bring it over to sin ming store instead? Thanks.
azaman said
Hi do you service 2012 rockshox monarch plus? if yes, how much?
melvin said
Hi, so sorry but we don’t.
Danny said
Hi how much will it cost to service a rockahox duke.
melvin said
Hi, labour is $80 without parts yet (eg. seals) for servicing.
Andrew said
Hi. How much do u charge to lower the travel of Manitou circus comp from 100mm to 80mm?
melvin said
Hi, labour at $35.
rey ogalino said
I need help on my manitou sherman, can u guys give me a call or sms when i can send my fork.thanks
melvin said
Hi, had already reply you on the address to send in.
Jeffrey said
how much for full servicing of fox talas 120/140mm? how long it will take to finish?
melvin said
Hi, price ranges around $140 depending on which parts needed for rebuild. Probably a week to finish.
Ilyaz said
Hi, how much do you charge to service a manitou mattoc? And which store should i send it to? Thank you.
melvin said
Hi, yes we do, charges are at $90. you may send it to our sin ming outlet. Thanks.
Ain said
Hi.. do u do customised fork?
melvin said
Hi, customise as in?
Stephen said
Hihi
Can you service my Rockshox Recon Gold Tk please? It’s a 2012 model. If so how much would it cost and how long would it take? Thanks stephen
melvin said
Hi, yes we do, duration around 3 workings days. Price at $80.
Jun Wei said
Hi, do you provide fork replacement service for a self purchase RockShox 30 GOLD TK Solo Air ? If yes how much would it be ?
melvin said
Hi, which part are you looking for?
Sean said
Hi,
How much would it cost to increase the travel of “Rock Shox 30Gold TK29 100 remote” from 100 to 120? How long would it take? Can this be done in the Sin Ming branch?
Thx
melvin said
Hi, depending on parts, price is at around $35 for labour. Yes, only available at sin ming branch.
Din Ellias said
Hi, how much do u charge for overhaul of an old manitou sherman flick? And how long would it take?
melvin said
Hi, usual charges are at $90 for labour. Duration probably a week.
Ernest said
Hi i had fox talas 36 RC2 that the responce and bounce is too slow. Is this can still service and how much for labor and parts?
melvin said
Hi, for the Talas system, price range for seal kit and labor charges are around $140.
Iyan said
Hi my Marzocchi 888 is leaking how much it will cost and how long it would take? thanks
melvin said
Hi, labour charges are at $100, replacement seals are not included yet.
Entong said
Hi,
How much it cost to reduce travel for rockshox sektor from 140 – 120mm?
melvin said
Hi, labour charges are at $35.
Entong said
Hi thanks for the info, I will bring my fork in one of this days. Is it in Sing Ming right?
melvin said
Hi, yes the Sin Min outlet. 🙂
Entong said
sorry my bad, it’s Sin Ming 😦
melvin said
No worries about it.
barry said
Hi how much to service a Fox float 32 fit rlc and also Fox rp23?
melvin said
Hi, for the fox float 32 rlc, charges are at $90, the fox rp23 with seal kit all change, charges are at $140.
Fadly said
Hello. My fork bottomed out due to a big hit last week and I have been losing air in my 120mm Fox 32 Float CTD FiT fork. Need to have a look and service. How much will it cost?
melvin said
Hi, price for the Fox 32 series are usually at $90 without parts yet.
CJ said
Hi there I have a set of marzocchi Z1 bam 1998 forks and I am looking for the quote for a full rebuild service quote. It is likely that the seals also need changing. Is that something you could source or would I need to provide that?
melvin said
Hi, you would need to provide the seal kit to us too and labour with oil and rebuild would cost $90.
Radd said
Hi and good day. Is it possible to replace the crown-steerer tube assembly of my Fox talas 36? The Steerer tube is too short for my new frame set. Roughly how much does that cost? Thank you very much.
melvin said
Hi, depending on the year series and coating for the stanchion tubes. Price ranges from $450 to $600.
Fazli said
HI can i check whether you all still service marzocchi bomber Ata 55 forks?
melvin said
yes we do.
Patrick Tan said
Hi, how much do you charge to service marzocchi bomber 55 rc3 ti .
( Change of oil and seal )
melvin said
Hi, labour charges are at $90. Seals and parts not included yet.
Patrick Tan said
when is the best time for me to send it down .thanks
Alex Saw said
Hi, I currently have a 2012 Fox 32 Talas FIT 150mm. It is currently not able to rebound when I ride on the bike. But when I dismount the bike, it will rebound back. I also noticed that the TALAS adjustment is also not working anymore. The lockout still works and the air pressure is correct. Please advise what could be the potential issue and how much will the estimated servicing cost and duration?
melvin said
Hi, depending on the agent, probably takes a few weeks.
Ramlan said
Hi bro…
How much do you charge to change the lower leg of 26″ 2014 Fox 32 Float Factory Series Kashima FIT CTD to 27.5?
Thanks
melvin said
Hi, labour at $45.
Nanobot said
Hi. I want to do a full service on my rock shox reba. And also lower down the travel from 120mm to 100mm. How much will that cost?
melvin said
Hi, yes we do, labour for everything at $110.
Foo fangyaw said
Hihi, do u service and repair manitou sherman
melvin said
Hi, yes we do.
Ahmad said
Hello there. How much to full service a marzocchi 66 rc2x 2007 model and what is the downtime? E fork seals will need replacement as it is old and has started to crack from the age. Hope to hear from u soon! Reply via my email if u can!
melvin said
Hi, yes we do overhaul the mention fork but we do not have any 2007 Marzocchi seals in stock.
Adyl said
Hi, i have a RockShox Recon Gold TK solo air suspension that seems to have oil on the knob used to adjust the rebound. Is it possible for you to service it? If so, how much would it cost
melvin said
Hi, labour are at $90 without parts yet.
Andrew Bennett said
Hi. I have some Marzocchi Bomber forks that need a full servicing. Please could you email me with a quote and details of where I need to bring my bike. Thanks.
melvin said
Hi, you could visit our sin ming branch.
Darlin said
Hi, How much it cost to service a rock shox pike 150mm RTC3 ?
melvin said
Hi, price includes labour but without parts at $90.
Nel said
Where’s your address? And contact number, I want to servicing my manitou r seven, thanks
melvin said
Hi, you might drop the fork at our sin ming branch. Shop contact at 66590903.
Sayuti said
Hi. How much does it cost to do servicing for Fox 32 series. Tapered 140mm travel. (I don’t know the model exactly). For 26″. And how Long will it take pls. Tq
melvin said
Hi, services labour usually ranges from $90 to $110 depending on which model. Duration would be dependent on queue.
Fido said
Hi, how much to service marz bomber fork? Duration?
melvin said
Hi, labour charges are at $90. Duration depending on queue.
Custom Computer SG said
Hi do your do servicing for marzocchi bomber rs 55 fork? Around 2012 model
melvin said
Hi, yes we do but without any dust cover seals replacement as local parts not available.
Nel said
How much repair for rock shock tora 302, lock not working
Nel said
My rock shock tora 302 solo air have sound while rebound, how much the repair ? Thanks
firdaus said
Hi do you service Rockshox Reverb dropper post(external routing)? If yes how much will it be?
melvin said
Hi, yes we do, misc like oil and valves/seals with labour are at $100.
melvin said
Hi, yes, labour charges are at $100 including oil.
Mac said
Hi i have a fox 34 float140mm. I want to add mote travel to make 160mm. How much and how long to do the service. Tnx
melvin said
Hi, which year model and series of your fork?
melvin said
Hi, depending on the fork, usual labour charges are at $45.
Edward said
Hullo, How long would it take to service my rockshox reverb external, and estimated charges to replace the seals and teflon bushing, and perhaps the pins. Thanks!
melvin said
Hi, labour charges are at $100 without parts yet, duration would depend on the current queue.
stevie tay said
Hi do you do conversion for rockshox xc32 tk coil to air?
melvin said
Hi, sorry but we do provide this service.
Ahmad said
How much for the CTD float evolution Shock Air Sleeve change services?
melvin said
Hi, for air sleeve seals only, labour is at $45 exclude seal kit.
Leo said
Hi, how much u charge for overhaul marzocchi bomber dual crown fork?
melvin said
Hi, labour is at $120 which includes fluid.
Neil louie said
How much full rebuild of RS reverb seatpost? Which include servicing of the internal fluid?
melvin said
Hi, yes as mention from you they are included, $100 include labour.
Sim Peng shin said
Hi, my reverb stealth seatpost is stuck in the down position. Are you able to fix it? If yes, how much does it cost?
melvin said
Hi, yes we do, labour at $100 exclude parts.
Alex Saw said
Are you able to service 2011 Fox 32 Talas RLC 120/150mm?