Hub
2013 Atomlab Pimplite rear hub
Precision machined. Our amazingly reliable Pimplite hubs are CNC machined and feature our enhanced 102-click engagement system. They are also some of the lightest thru-axle hubs on the market. You can feel the difference.
- available with a 9-speed or 11-speed cassette
- cnc machined 6061 aluminum is 6-bolt disc body
- big, durable, and smooth sealed bearings
- 142mm, skewer and bolt-on axle adapters are available
- new cassette system w/ 102 points of engagement
- 12×135 = 280g / 12×150 = 295g
2013 Atomlab Pimplite front 20 hub
Precision machined. They are also some of the lightest thru-axle hubs on the market. You can feel the difference.
- cnc machined 6061 aluminum is 6-bolt disc body
- big, durable, and smooth sealed bearings
- 20mm front = 168g
2012 Octane One ORBITAL PRO SS premium rear singlespeed hub with driver @ $140
A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit’s big strong bearings inside. The result is that the hub runs smoothly and there will be no problems at all with the driver bearings. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminum. The hub is anodized matt and has nice black hardware. It hub comes with a disc brake mount and is offered in both 32h and 36h versions.
- material: 6061 alloy body, steel axle & nuts, 6061 cones with steel inserts
- 4 sealed bearings
- width: 135mm O.L.D
- axle: 10mm, width: 175mm
- comes with 10t driver for 1/8” chains
- disk brake mount IS (International Standard / 6-bolts)
- available in 32h and 36h versions
- weight: ~485 grams
- colours: black(32h/36h), silver(32h), blue(32h/36h) only
2012 Octane One ORBITAL 20 front hub @ $88
Light and strong hub for 20mm thru-axle forks. Great choice not only for dirt/street riders! Rolls smoothly on high quality sealed bearings. Aluminum 7075 cones. Anodized matt finish and black hardware. Disc brake compatible. Offered in 32h versions.
- material: 6061 alloy body, 7075 hardware
- 2 sealed bearings
- width: 110mm O.L.D
- axle: 20mm
- disk brake mount IS (International Standard / 6-bolts)
- available in 32h versions
- weight: ~200 grams
- colours: black, blue, silver
Octane One ORBITAL PRO premium rear cassette hub @ $130
A light and strong MTB cassette hub that runs on 4 sealed bearings. Allen female bolts for a super clean look and strong clamping force (much stronger than a standard Q-R that can be found in most hubs on the market). The cassette body is made from 7075 alloy for weight saving. The alloy cones comes with a special reinforcing insert made of steel. The hub is anodized matt and has black hardware. It is disc brake compatible and available in both 32h versions.
- material: 6061 alloy body, AL7075 cassette body, steel axle, 6061 cones with steel inserts
- 4 sealed bearings
- width: 135mm O.L.D
- axle: hollow 10mm, width: 145mm
- lightweight aluminium 7075 cassette
- clean looking allen female bolts replacing Q-R
- possibility to remove bolts and use standard Q-R skewer
- disk brake mount IS (International Standard / 6-bolts)
- available in 32h versions
- weight: ~430 grams
- colours: black, silver only
Sun Ringle Jumping Flea Front and Rear Hub
All Mountain, Downhill, Freeride, Dirt Jump
Front Hub Specs:
- 6061 T6 Alloy Body
- 7075 T6 Alloy Axle
- 20mm or 15mm Axle Type
- Japanese cartridge bearings
- 32, 36 Hole Count
- 192g
Rear Hub Specs:
- 6061 T6 Alloy Body
- 7075 T6 Alloy Axle
- 12mm Thru-Axle Type
- 135/142/150 Axle Spacing
- Japanese Cartridge Bearings
- Radial Needle Bearing in Free Hub Body
- 32 Hole Count
Transition Bikes Revolution Front Hub
Revolution 32 hubs are definitely our work horse hubs that aren’t too light but extremely tough.
Perfect for any freeride or DH application, they come in a ton of colors so you can personalize your wheels to your taste.
- 20mm Thru Axle Front Hub
- Rear Hub 135mm rear hub spacing with 10mm QR axle and Covertable to 12mm
- Sealed Cartridge Bearings
- Steel Freehub Body
- 3 Pawl system with 22 engagement points
- FLANGE DIAMETER FRONT: Left 58mm, Right 45mm
- FLANGE DIAMATER REAR: Left 58mm, Right 54mm
- CENTER TO FLANGE FRONT: Right: 34mm, Left: 23mm
- CENTER TO FLANGE REAR: Right: 20.6mm, Left: 34.6mm
- COLOURS: Black, Green, Blue, Gold, Red
Transition Bikes Revolution Rear Hub
Revolution 32 hubs are definitely our work horse hubs that aren’t too light but extremely tough.
Perfect for any freeride or DH application, they come in a ton of colors so you can personalize your wheels to your taste.
- 20mm Thru Axle Front Hub
- Rear Hub 135mm rear hub spacing with 10mm QR axle and Covertable to 12mm
- Sealed Cartridge Bearings
- Steel Freehub Body
- 3 Pawl system with 22 engagement points
- FLANGE DIAMETER FRONT: Left 58mm, Right 45mm
- FLANGE DIAMATER REAR: Left 58mm, Right 54mm
- CENTER TO FLANGE FRONT: Right: 34mm, Left: 23mm
- CENTER TO FLANGE REAR: Right: 20.6mm, Left: 34.6mm
- COLOURS: Black, Green, Blue, Gold, Red
Profile Racing Front Hub
We are constantly testing and improving our products to make them better but not at your expense. As a matter of fact, you can install Profile cranks from 1995 on a brand new Profile Gun Drilled Hollow bottom bracket spindle. In short, our philosophy is, if a design works, why redesign it?
- 20mm Thru Axle design, with or without Disc Brake Mounts
- Available in all colors
- Also available with 3/8″ (10mm) bolt-on or QR models.
- 20mm No Disc = 7.4oz 210g
- 20mm Disc = 8.7oz 246g
Profile Racing Rear Cassette Hub
You hear a lot about “All New” and “Redesigned” and “Re-envisioned” from other bike companies. While this is exciting (everybody likes new stuff), there remains the fact that the parts that they just introduced have made their “old” stuff, made last year, obsolete. We have a slightly different philosophy here at Profile Racing. We make high quality bicycle components to last. We are constantly testing and improving our products to make them better but not at your expense. As a matter of fact, you can install Profile cranks from 1995 on a brand new Profile Gun Drilled Hollow bottom bracket spindle. In short, our philosophy is, if a design works, why redesign it?
- (l-r)Single Speed, 8-9 Speed, 150mm
- All available in all colors
- SS and 8-9 spd available with 3/8″ (10mm) bolt-on or QR
- SS compatible with all Profile drivers 8-18t in CrMo and Ti
- 8-9 spd and 150mm available with Ti or AL Shimano compatible driver
- Single Speed =17.6oz 500g(bolt on 10mm axles & CrMo Driver)
- 8-9 Speed =13.7oz 388g(qr axle & Ti Driver)
- 150mm =14.2oz 402g(Ti Driver)
Sun Ringle Dirty Flea Front and Rear Hub
Dirty Flea Front and Rear Hubs w/o quick release skewer
- Xc / All Mountain
- 6061 T6 Alloy Hub Body
- Two Sealed Cartridge Bearings
- 32 Hole
- Black
- Laser Engraved Graphics
- Four Sealed Cartridge Bearings Rear
- Weight: 173g Front
- Weight: 285g Rear
Shimano XTR Disc Hub Front and Rear M975
Since its introduction, XTR has held true to its original design philosophy of delivering top-level performance in a lightweight, beautifully-engineered package. XTR raises the bar again – by reducing complete group weight by almost a pound, increasing stiffness, strength, and delivering even more durability. When combined with innovative new features, XTR delivers the ultimate riding experience.
- Angular contact bearings and oversize alloy axles for Increased wheel rigidity, precision bearing adjustment and easy maintenance New FH body design for Quicker pawl engagement (more than 125% faster compared to current model)
- New seal design Improves seal performance by 400%
- Center Lock rotor mount system
- Spoke holes:32H
Shimano XT Disc Hub Front and Rear M775
Shimano XT Disc Hub Front and Rear M775 with quick release skewer.
- Performance front hub for use with Disc and rim brakes, using Centre-Lock mounting system
- Designed to be used with either Centre-Lock Disc rotor mount for secure hassle free setup or regular rim brake
- Features a alloy axle for lightweight and rigidity when used with suspension forks
- Double contact sealing with internal grease sleeve keeps out water and dirt from bearings and ensures constant smoothness and longevity whilst keeping the grease in place
- Ultra smooth bearing races provide precision low-friction rolling
- Rubber cap for Centre-Lock mount included should you choose to use this hub for rim brake use
- Quick release lever and adjuster nut are lightweight and easy to adjust
Chris King ISO Rear Disc Hub
- OLD 135 mm
- Rotor mount 6-bolt
- QR axle inserts Standard
- Fun Bolts Option for rear hub
- Drilling 28, 32, and 36 hole
- Weight: 336g
Chris King ISO 15mm Front Disc Hub
- Axle – 15mm
- Hole Count – 32H or 36H
- Short travel oriented option
- Can easily swap to a standard QR axle
- Small Diameter
- Weight: 164g
Chris King ISO 20mm Thru-Axle Front Disc Hub
- One piece aluminum axle is capped with 2 stainless steel axle biters
- Axle width 110mm
- Flange Diameter Drive side/non Drive side 57.4mm
- Center to Flange Drive side 31.2mm
- Center to Flange non-Drive side 23.1mm
- Compatible with the ISO disc standard
Hope Pro 2 Front Disc Hub
- Hub Spacing: 100mm
- Spoke Drilling: 32 hole
- Weight: 185 g.
- Skewer Not Included
Hope’s lightweight Pro II front disc hub represents the next evolution in hub design with performance and durability capable of handling your aggressive style. The hub body is machined from a solid billet of 2014 T6 aluminum and features high-quality sealed cartridge bearings and a 6-bolt, ISO disc rotor mount. Optional front hub end caps (purchased separately) allow easy conversion from QR to 15 or 20mm thru-axle. Black, silver, blue, Gunsmoke, red or gold.
Hope Pro 2 Rear Disc Hub
- Cassette Body: 8 or 9 speed
- Hub Spacing: 135mm
- Spoke Drilling: 32 hole
- Weight: 295 g
- Skewer Not Included
Hope’s lightweight Pro II rear disc hub represents the next evolution in hub design with performance and durability capable of handling your aggressive style. The hub body is machined from a solid billet of 2014 T6 aluminum and features features 4 high-quality sealed cartridge bearings and a 6-bolt, ISO disc rotor mount. The hub’s one-piece, 7075 aluminum freehub body has four pawls that engage the twenty-four tooth steel ratchet fixed into the hub shell and sealed with a frictionless, non-contact labyrinth seal. Sram/Shimano 9/10-speed compatible. Black, silver, blue, Gunsmoke, red or gold.
Tiong Hin Co Tyre - MTB Zone 
keith said
Hi, do u have hope pro 2 (gold) with ztr flow (gold).
Thanks and hope to hear from u soon.
melvin said
Hi, yes we do for the hubs but for the rims it would only be 26″ size upon order.
Desmond Chew said
How much is the XTR rear hub for 32h spokes 135mm axles?
melvin said
Hi, so sorry but we do not have any stock of those.
Badut said
Sorry not chris king, profile hub set.. Front 20mm, Rear 142x12mm
melvin said
Hi, do call our sin ming store to check on availability.
syahid2lim said
do you have hope pro 2 ss version? how much?
melvin said
Hi, do call our sin ming outlet to check on availability.
zann said
How much u selling hope pro 2 evo hubs? Dimension 135x10mm..
melvin said
Hi, bolt on or qr version?
zann said
Bolt on.. Sorry..
melvin said
Hi, bolt on not available for now.
Kaenen said
Octane One ORBITAL PRO premium rear cassette hub @ $130
Does it fit 7 speed bike?
melvin said
Hi, sorry it won’t fit a 7 speed cassette.
Kaenen said
will any hub fit a 7 speed?
melvin said
Hi, probably you could get the specific 7speed hubs like the Shimano non series.
Zann said
Do u have profile racing rear hubs 135×10?
Clint Sciberras said
Hi
Good morning, I need set of hubs gold 36H for my specialized Enduro Evo Expect 2011, front 20mm, rear normal with quick realized.
Regards Clint
melvin said
Hi, so sorry but we do not have any 36h hub in stock.
is said
Jialong. Do you stock axles for the profile elite hubs? Planning to convert a 135 to 142 for my new frame. How much?
melvin said
Hi, yes we do, do call us at our sin ming stock to confirm the available end caps for the conversion.
bong said
u have hope stem GOLD color front and rear? if so how much both?
melvin said
Hi, so sorry but we don’t have any stock for now.
Foraiza said
hi melvin, do u have available single speed hub disc with pricing?
melvin said
Hi, which brand are you looking for? Thanks.