Wheelset

SUNRingle 2011 Punch
Hardcore wheelset for Freeride and Dirt jump application.


Transition Bikes Revolution 32 Wheelset
The Revolution 32 wheelset is a midweight freeride/DH wheelset. Strong enough for punishing trail conditions like Whistler but light enough to throw on your all mountain bike as well. Revolution 32s are a versatile wheelset you can throw on just about any bike.
20mm thru axle front hub (convertible) and 10x135mm rear disc wheelset. 32mm wide rims with 32 spokes. 14g straight guage black spokes with anodized hubs.


Transition Bikes Revolution 28 Wheelset
The Revolution 28 wheelset is our mediumweight all mountain/enduro wheelset designed with performance in mind. This versatile wheelset can run a standard QR front, 15mm or 20mm thru axle to fit any fork on the market. Wheelset includes the Revolution 28 rim which is 28mm wide, and 32 hole drilling. Front hub includes 2 fully sealed bearings and comes standard as 20mm thru-axle (convertible between 20mm, 15mm, 9mm QR with adapters sold seperately). Rear hub includes lightweight alloy casssette body, 4 sealed bearings, and comes standard as 10mm QR (convertible between 10mm thru-axle to 12mm thru-axle with adapters sold seperately).

Transition Bikes Revolution 25 Wheelset
The Revolution 25 wheelset is our lightweight trail/all mountain/enduro wheelset designed with performance in mind. This versatile wheelset can run a standard QR front, 15mm or 20mm thru axle to fit any fork on the market. Wheelset includes the Revolution 25 rim which is 25mm wide, and 32 hole drilling. Front hub includes 2 fully sealed bearings and comes standard as 20mm thru-axle (convertible between 20mm, 15mm, 9mm QR with adapters sold seperately). Rear hub includes lightweight alloy casssette body, 4 sealed bearings, and comes standard as 10mm QR (convertible between 10mm thru-axle to 12mm thru-axle with adapters sold seperately).

SUNRingle Carbon SRD
Sun Ringle has some new trick carbon rims. The SRD (Sun Ringle Racing Development) Carbon Wheels only come in a 26 inch size, and are 26mm wide, and have a very nice looking carbon matte finish, which goes well with the bright gold direct pull hubs. Weight is 1550 grams.These things are hot off the mold. The SRD wheelset will share the hubs with the new Black Flags. The Sun-Ringle SRD Carbon wheels have a nice matte carbon finish juxtaposed with shiny gold hubs and incognito black spokes. Top of the line wheels get the SRD (Sun-Ringle Racing Development) treatment in the guise of carbon fiber rims and new hubs for the SRD Carbon Wheels.

SUNRingle Charger Pro
Sun Ringle has produced some new tubeless compatible rims using the licensed Stan’s NoTube bead socket technology (BST). The new and very sweet looking Sun Ringle Chargers are available in either the Pro or Expert versions, in 26 and 29 inch sizes, and come in either black or white. The All Mountain Chargers use 28mm rims, and get the Stan’s NoTubes rim treatment (licensed from Stan’s). The hubs are Direct Pull on the Charger Pro (red only) or normal on the Expert (black only). The hubs have an option for interchangeable end caps (ala Hope), 9mm or 15mm or 20mm on the front. Weight for the Pro is 1699 grams.


SUNRingle Charger Expert
The new and very sweet looking Sun Ringle Chargers are available in either the Pro or Expert versions, in 26 and 29 inch sizes, and come in either black or white. The All Mountain Chargers use 28mm rims, and get the Stan’s NoTubes rim treatment (licensed from Stan’s). The hubs are Direct Pull on the Charger Pro (red only) or normal on the Expert (black only). The hubs have an option for interchangeable end caps (ala Hope), 9mm or 15mm or 20mm on the front. Weight for the Pro is 1725 grams. Sun Ringle has produced some new tubeless compatible rims using the licensed Stan’s NoTube bead socket technology (BST). New for 2010 is the Charger wheelset, which is available in both Pro and Expert trim levels and is aimed at the all mountain and cross country market.


SUNRingle Black Flag Pro
Sun Ringle has produced some new tubeless compatible rims using the licensed Stan’s NoTube bead socket technology (BST).The new updated Sun Ringle Black Flag are available in either the Pro or Expert versions, in 26 and 29 inch sizes, and come in either black or gold. The XCountry Black Flags were upgraded to 24mm rims, and also get the Stan’s NoTubes rim treatment. The hubs are Direct Pull on the Pro (black or gold only) or normal on the Expert (black only). Weight for the Pro is 1620 grams.


SUNRingle Black Flag Expert
The new updated Sun Ringle Black Flag are available in either the Pro or Expert versions, in 26 and 29 inch sizes, and come in either black or gold. The XCountry Black Flags were upgraded to 24mm rims, and also get the Stan’s NoTubes rim treatment. The hubs are Direct Pull on the Pro (black or gold only) or normal on the Expert (black only). Weight for the Pro is 1620 grams.


Crank Brothers Cobalt
The design of the new Crank Brothers Cobalt Wheelset eliminates the need to drill any holes in the rim, replacing them instead with a unique extruded internal/external radial centre rib. The un-drilled rim is a lot stronger and is also inherently suitable for tubeless tyres. The aluminium freehub body on the rear hub features 6 pawls in two sets of 3 engaging 48 times every wheel revolution to ensure near instantaneous pickup. The hubs also feature oversize cartridge bearings on an ovesized axle for strenght with light weight.

Crank Brothers Iodine
The design of the new Crank Brothers Iodine Wheelset eliminates the need to drill any holes in the rim, replacing them instead with a unique extruded internal/external radial centre rib. The un-drilled rim is a lot stronger and is also inherently suitable for tubeless tyres. Spokes are attached to this central rib section in matched pairs to more evenly distribute the tension from each spoke and allow for easier truing, which can be done with a standard spoke key.
Weight – front/rear 870g / 995g
Rim Material 6061-t6 aluminium
Rim Colour burnt orange
Rim Joint – welded
Rim Internal width – 21mm
Rim Valve hole dia. – 6.5mm
Rim Braking surface – Disc brake only
Spokes Material – stainless steel
Spokes Colour – silver
Spokes Butting – 2.0 / 1.6 / 2.0
Spokes Number – 24
Nipples Material – 7075-t6 aluminium
Nipples Colour – burnt orange
Front hub shell – 2 sealed 25x37x7 Cartridge bearings
Front axle length – 20mm Thru Axle, convertible to 100mm QR, Adapters included
Rear hub shell – 2 sealed 25x37x7, 2 sealed 17x28x7, Cartridge bearings
Rear axle length – 135mm qr
Tyre tubeless compatible
Recommended tyre size – 2.3-2.5″

Mavic Crossmax SLR UST 6-Bolt Wheels 2011
Crossmax SLR 09 features a patented Mavic technology used for the first time : ISM 3D. Inter Spoke Milling 3D pushes the concept one step further by machining not only the lower bridge of the rim but also its sidewalls. The result is a lighter rim providing the most dynamic ride ever : instant acceleration, direct steering and reactive braking. The front wheel is also available in 20×110 version, providing better bike handling, thanks to a stiffer front end. Also available in lefty version.

Mavic Crossmax ST Disc 6-Bolt Wheels 2011
Innovative and reliable, the crossmax st Disc is a proven reference Lighter and tougher. The new crossmax ST Disc is a proven reference.Lighten and touher. The new Crossmax ST even more dynamic with a lower inertia thanks to its fully inter spoke milled rim (ISM). Highly versatile, it is compatible with all front and rear retention systems. New graphics highlight those new features. Also availle in 20mm and Lefty version.
Cross Country responsiveness available for Cross mountain

Mavic Crossride Disc 6-Bolt Wheels 2011
The access to the Mavic mountain bike performance.Entry level at Mavic always means quality, efficiency and reliability. Completely endorsed by the Crossride – an incredible value!

Advertisements

7 Comments »

  1. Delon said

    can i know the the price of 26″ Mavic Crossmax ST Disc 6-Bolt Wheels 2011

    and also 26″ ZTR ARCH EX with hope pro 2 evo price please

    • melvin said

      Hi, Mavic CrossMax ST no stock. ZTR Arch EX at $210 a pair. Hope Pro 2 Evo at $390 a pair.

  2. Andy said

    hi, do u carry any 26″ vbrake mtb wheelsets?

    • melvin said

      Hi, yes we do but available in custom instead then complete wheels from factory.

  3. Ninio said

    Hi do u build wheelset with a hope pro 4 hub (blue color) with flow ex rims? how much? thanks.

    • melvin said

      Hi, price range at around $700.

      • Ninio said

        Hi bro Melvin, how about WTB ST i25 at hope pro 4 hub. thanks again

RSS feed for comments on this post · TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: