Stem

2013 Straitline Ultra Direct Mount Boxxer Stem
Inspired by Canadian DH champion Drew Mitchell, the new Straitline direct mount stem is ultra short, ultra light and ultra rigid. Designed for the rider that wants the shortest possible setup.

2013 Straitline Pinch Clamp Stem
The new Straitline stem is a perfect fusion of form and function. Combining stylization more commonly seen on high-end sports cars, with the simplicity of traditional pinch clamp designs. The split pinch clamp offers weight reduction and added clamping force. The stem has tremendous torsional rigidity, due to a combination of its extra wide boxy cross section and the use of 6mm high strength alloy steel fasteners, at a ridiculously low weight.

2013 Straitline AMP Stem
The Straitline AMP stems are designed to be light-weight yet rugged enough for the most demanding freeride applications.
“The AMP uses a fully closed, shaped edge for strength and clearance in the corners”

2012 NS Bikes Quark Pro Big Stem
The Quark Pro Big stem is 31.8. Both the big and small stems remain unchanged in form. They are available in a number of new colours.
Using our own extrusion mold, these stems are cold-forged before going into the CNC department. We used a lot of precision machining on the outside and inside of the new stem, allowing us to drop weight without sacrificing strength. The short reach and zero degrees rise makes it the perfect stem for new school riding.

2012 Octane One Chemical Pro Stem @ $68
New front load stem made of custom forged aluminium 6061 available in 25.4 bar bore size. Strong, lightweight, good aesthetics and affordable.



Answer DH Direct Mount Stem Minus 1
Answer’s DH stem is as strong as it is simple. It is made of 7075 series alloy for maximum strength and features a wide faceplate for stiffness and evenly distributed clamp force.


Answer Rove XC Stem
6066 forged post CNC machined – this ain’t no Taiwan off the shelf POS! Internal and External Tapered walls in stem body. Allows for stiff bar clamp interface without sacrificing weight . Includes 3mm and 5mm headset spacers and star nut and top cap. 2 bolt opposed steer tube clamp.


Transition Bikes Temple Lite Stem (1-1/8 inch)
The Temple Lite Stem is our CNC machined stem that is light enough for almost any application. This stem features a ton of CNC work to it which makes it extremely strong and light. Available in 3 colors, this stem is a great addition to any bike that won’t weigh it down.



Answer Rove AM Stem
6066 forged post CNC machined – this ain’t no Taiwan off the shelf POS! Internal and External Tapered walls in stem body. Allows for stiff bar clamp interface without sacrificing weight . Includes 3mm and 5mm headset spacers and star nut and top cap. 2 bolt opposed steer tube clamp.

Answer Rove Dirt Jump Stem
Answer DJ stem is as strong as it is simple. It is made of 7075 series alloy for maximum strength and features a wide faceplate for stiffness and evenly distributed clamp force. Two lengths allow you to perfectly dial in your reach.

Answer DH Stem
Answer’s DH stem is as strong as it is simple. It is made of 7075 series alloy for maximum strength and features a wide faceplate for stiffness and evenly distributed clamp force. Three sets of offsets allow you to perfectly dial in your reach.

Kore B1B DH Stem
If you like nothing more than hammering the Downhills and riding hard then look no further than our new 3D forged and CNC machined B1B DH Stem.

blbstem

Kore B52 Stem
B-52 Stem from Kore.

Stem_NewB52_55_lg

Kore K34 Standard Race Stem
The new Kore Race 4 bolt Forged Stem shares the same patented “Knee Saver” design as the KORE Elite Stem and our original KORE Lite Stem. This design is stronger, more durable, and safer than any other clamp design on the market.

RACE_KIS_STEM_lg

Thomson Elite X4 Stem
The new Thomson X4 for Mountain and Road allow you to realize the benefits of stiffer forks and stiffer 31.8 bars. They offer precise steering, tracking, and more control while riding, all wrapped up in a beautiful design. The Thomson X4 is stronger and 30 grams lighter than the Thomson Elite 25.4 mountain stem.

elitex4stem

Thomson Elite Stem
All Thomson Stems can be flipped and run opposite their stated rise (upside down) giving you more fit options. The Thomson stem is machined from 7000 series aluminum and the stem is one-piece design with no welds or joints. The Thomson stem has passed extensive life and ultimate strength tests.

elitestems

2 Comments »

  1. ekhsan said

    March 22, 2014 @ 1:25 am

    How much for your answer rove am stem

    Reply

RSS feed for comments on this post · TrackBack URI

Leave a comment